Open 24/7 — we answer personally(330) 844-7189
JJK Mobile Welding truck on site with welding underway on a heavy steel bucket
Services/Heavy Equipment

Heavy Equipment Repair Welding in Canton, OH

Cracked frames, torn bucket lips, broken hinge pins, and worn mounting points on excavators, loaders, and dozers — welded where the machine sits.

Welder in full hood welding wear blocks onto a heavy steel shell at an equipment yard

Heavy equipment takes abuse that cracks steel. Bucket lips crack across the hardfacing, frames crack at the stress risers near pivot points, and mounting plates tear when a machine is pushed past what it was built for. When any of that lets go, the machine is down and it is losing you money every hour it sits.

We weld heavy equipment on-site because most of it cannot be moved cheaply and should not be moved broken. The repair has to happen in position — often overhead or vertical, on thick plate that needs proper prep and the right procedure to hold under load again.

Send a photo of the crack and we can usually tell you what it will take before we roll. We are qualified to AWS D1.1 and AWS D1.2, all positions, which is the standard structural work calls for.

The process

How heavy equipment works

01

Call

Tell us what machine is down and where. The owner answers personally, any hour.

02

Photo the crack

A photo of the break tells us the plate thickness and position so we can quote and load the right rod and wire.

03

Prep on-site

We grind out the crack to sound metal and bevel for full penetration before we strike an arc.

04

Weld & inspect

We weld it in position, clean it up, and check the repair before the machine goes back to work.

Service area

Mobile service across Northeast Ohio

Based in Canton, Ohio. We roll to your equipment across Stark, Summit, Wayne, Tuscarawas, Carroll, Columbiana, Holmes, and Coshocton counties.

FAQ

Heavy Equipment questions

Can you weld a cracked bucket on an excavator?

Yes. Cracked bucket lips and sides are common heavy-equipment repairs. We prep the crack to sound metal, bevel for penetration, and weld it in position where the machine sits.

Do you work on all brands of heavy equipment?

The repair is about the steel and the weld, not the brand. We weld cracked frames, buckets, and mounting points on excavators, loaders, dozers, and similar equipment regardless of manufacturer.

My machine is down right now — how fast can you get here?

Call. We answer 24/7 and roll as soon as we are loaded. Inside Stark County that is usually within the hour; further out we give you an honest arrival window when you call.

Equipment down right now?

Call the owner personally. Any hour. You get the welder, not an answering service.

Call Now(330) 844-7189